Comelit FT PLANUX MEMOVIDEO - Manual (Page 45)

45
ADVANCED
DESCRIPTION OF ADDRESSES MENU
Simplebus code Simplebus code
Monitor
1
2
Sat 05/09/09 16:07
1 Menu for setting the bracket code.
2 Menu for setting a monitor as main / secondary.
SETTING THE BRACKET CODE
Number
1 2 3 4 5 6 7 8
9 0
C
Sat 05/09/09 16:07
Access the menu Setup > Advanced > Addresses >
Code. Enter the bracket code and press the icon to
confirm.
Each bracket in the system is identified by its own code;
this code should be a number between 1 and 240.
SETTING A MONITOR AS
MAIN / SECONDARY
Main Main
Main (multi)
Sat 05/09/09 16:07
Secondary
Access the menu Setup > Advanced > Addresses >
Monitor.
Select the setting by pressing the icon to the right of it.
Observe the limits specified in the installation
diagrams on the technical sheet FT/SBC/22
If the SD card is not inserted, the following message will
appear:
1
1 2 3 4 5 6 7 8
9 0
C
Sat 05/09/09 16:07
SD card error,
parameter saved in flash