Behringer SHARK DSP110 - Manual (Page 22)

22
SHARK DSP110
4. SPECIFICATIONS
AUDIO INPUTS
Connectors
XLR and 1/4" jack
Type RF filtered, servo-balanced input
Impedance 6 kOhms balanced, 3 kOhms unbalanced
Nominal Operating Level microphone or line level source (switchable)
Max. Input Level +19 dBu at microphone level and line level
AUDIO OUTPUTS
Connectors
XLR and 1/4" jack
Type electronically servo-balanced output stage
Impedance 60 Ohms balanced, 30 Ohms unbalanced
Nominal Operating Level microphone level source or +4 dBu (switchable)
Max. Output Level +20 dBu at +4 dBu nominal level, -12 dBu at microphone level
SYSTEM SPECIFICATIONS
Frequency Response
10 Hz to 21 kHz
Noise > 92 dB at line level, unweighted, 22 Hz to 22 kHz
> 89 dB at microphone level, unweighted, 22 Hz to 22 kHz
THD 0.007 % typ. @ +4 dBu, 1 kHz, gain 1
DIGITAL PROCESSING
Converters
24-bit Sigma-Delta, 64/128-times oversampling
Sampling Rate 46.875 kHz
DISPLAY
Type
4-digit numeric LED display
POWER SUPPLY
Mains Voltages
USA/Canada 120 V ~, 60 Hz, PSU DSP110UL
U.K./Australia 240 V ~, 50 Hz, PSU DSP110UK
Europe 230 V ~, 50 Hz, PSU DSP110EU
Japan 100 V ~, 60 Hz, PSU DSP110JP
General export model 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz
PHYSICAL
Dimensions (H * W * D)
approx. 2 1/4" (56 mm) x 3 1/2" (88 mm) x 5 1/8" (130 mm)
Net Weight approx. 0.5 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing products without prior notice. Specifications and appearance
may differ from those listed or illustrated.
4. SPECIFICATIONS