BT DF60 - Manual (Page 9)

6
Setting up
• Push down the small white lever and close
the cover leaving the excess paper on the
outside of the cover.
• Tear off the spare paper along the
serrated edge.
• Display shows the time, day and AUTO.
7 Setting the date and time
If necessary you can alter the date and time.
• Press the FUNCTION button until display
shows: SET TIME & ID?
• Press the YES button, display shows the pre
set date and time.
• Using the keypad enter the new date and
time in the format DayDay, MonthMonth,
YearYear, HourHour, MinuteMinute using
the 24 hour clock for the time.
eg: To set 25 minutes past 4 in the afternoon
on 28th February 1996 enter:
2802961625.
• Press the YES button to confirm the setting.
• Press the STOP/CLEAR button to return
to standby.
• Lift the small white lever on the right
hand side
• Place the paper roll in the compartment
ensuring both ends are located on the spigot
and that the paper is coming off the bottom
of the roll.
• Pull off 150 - 200 mm of paper and feed it
under the black rubber roller as shown until
it reappears, pulling through any slack and
making sure the paper is straight. You may
feel slight resistance from the roller.
YES NO
FUNCTION RESOLUTION CONTRAST POLL SPEED DIAL REDIAL
MONITOR
1 2 ABC 3 DEF
4 GHI 5 JKL 6
MNO
7 PQR S 8 TUV 9
WXY Z
0 STOP/
CLEAR START/
COPY
DF60
TAD
ᮣᮣ
ᮤᮤ
ᮣ /
DEL/REC
T/P RING SPEAKER