BT DF60 - Manual (Page 23)

To switch the recording time limit off
• Press the TAD button then press the ᮤᮤ
button.
• Press the YES button until the display
shows:
ICM TIME OUT: ON?
• Press the NO button to change ON to OFF .
• Press the YES button to select your option.
• Press the STOP/CLEAR button to return to
standby mode.
With OFF selected the recording time is
limited only by your DF60’s amount of free
memory space.
Call screening
This facility (pre-set to ON ) allows you to listen
to messages as they are being recorded. If,
during the message, you decide to take the
call, lift the handset and speak to the caller.
Your DF60’s answering machine will
automatically stop recording.
To switch call screening off
• Press the TAD button then press the ᮤᮤ
button.
• Press the YES button until the display
shows:
CALL SCREEN: ON?
• Press the NO button to switch between ON
and OFF .
• Press the YES button to confirm your
selection.
• Press the STOP/CLEAR button to return to
standby mode.
20
Using the answering
machine