Cambridge SoundWorks SoundWorks 765i - Manual (Page 7)

GETTING STARTED
A).Remove.the.SoundWorks.765i.from.its.protective.
polybag.and.place.it.in.your.preferred.location...
Note:.The.765i’s.bass.output.will.be.reduced.if.it.is.
placed.on.a.plush.surface,.like.a.thick.carpet.or.rug..
The.Tone.Alarm.volume.will.also.be.reduced.
B).To.prepare.and.connect.the.AM.band.antenna:..
1).Locate.the.antenna
2).Fold.the.base
3).Snap.the.base.into.place
4).Position.the.AM.antenna.in.an.out-of-the-way.
site..Avoid.placing.it.near.the.765i.Power.Supply.
Insert.the.AM.Antenna’s.miniplug.into.the. REAR
CONNECTOR PANEL.minijack.marked.AM.ANT.
Rotate.the.AM.antenna.to.achieve.the.best.signal.for.
individual.AM.stations.
C).Straighten.the.wire.antenna.on.the.
REAR CONNECTOR PANEL.marked.“FM.ANT”.
A
B
D
2 1
4 3
C
REAR CONNECTOR PANEL
D).Connect.the.Power.Supply.by.inserting.the.its.AC.
plug.into.a.convenient.outlet..Then.insert.the.Power.
Supply’s.smaller.DC.plug.into.the.jack.in.the.rear.of.
the.765i.marked.DC.power.
1
STRAIGHTEN FM WIRE ANTENNA
765i POWER INPUT
For best AM radio reception, position
the Power Supply case at least three feet
away from the AM Antenna
CSW_SW765i_UM_13.indd 7 9/24/2007 3:28:45 PM