Cambridge SoundWorks BassCube 10S Powered Subwoofers - Manual (Page 14)

14 14 14
Final Adjustment Note:
Use a variety of your favorite program material (video
or audio) when adjusting the subwoofer output. Once
you arrive at the best setting, leave the SUBWOOFER
LEVEL control at that setting. Use your audio system
tone controls to make temporary bass output
adjustments.
We hope you enjoy the new sonic dimensions your
BassCube subwoofer reveals to you.
Fuse Replacement
RISK OF FIRE
REPLACE FUSE
AS MARKED
1A 250V
RISK OF FIRE
REPLACE FUSE
AS MARKED
FUS
E
T
1A 250V
RISK OF FIRE
REPLACE FUSE
AS MARKED
T
1A 250V FUS
E
FUS
E
1. IMPORTANT: Turn off and unplug the subwoofer before changing the fuse.
2.) Fuse located on the back panel. 3.) Push in and turn counter-clockwise. 4.) Fuse will pop out of its casing. 5.) Gently remove and replace.
TM Newton Series and BassCube are trademarks of Cambridge SoundWorks, Incorporated.
® Cambridge SoundWorks, Ensemble, Ambiance and MovieWorks are registered trademarks of Cambridge SoundWorks, Incorporated.
® Dolby Digital, DTS, Dolby Pro Logic and Dolby Surround are registered trademarks of Dolby Laboratories Licensing Corporation.
Cleaning the Cabinets
If more than dusting is needed, the finish on the sub-
woofer can be cleaned with a window or vinyl cleaning
product. Avoid spraying the cleaner underneath the
cabinet to prevent damage to the speaker. Avoid plac-
ing the BassCube on a wet or damp carpet.