Cambridge SoundWorks S200 MultiPole Surround Speakers - Manual (Page 5)

5
Hang the S200 or S300 directly on a wall:
Install a No.10 screw in the wall so that its screwhead
protrudes about 3/8 inch. Cambridge SoundWorks
supplies screws and plastic anchors for your conven-
ience, but it is the installer’s responsibility to insure the
screw is securely mounted.
Apply the soft, self-adhesive feet to back of the speak-
ers. The feet protect the finish of the speakers or the
surface and improve stability if the surface is not per-
fectly flat.
SPEAKER MOUNTING
00000000
RIGHT
Newton, Massachusetts
USA
+ — 8 Ohms
S200
Multipole“
Surround
Loudspeaker
USE THIS KEYHOLE SLOT
TO HANG THE SPEAKER
FROM A SCREWHEAD.
USE THE THREADED
INSERT TO ATTACH
A SWIVEL BRACKET. (SIDE VIEW)
(BACK VIEW)
APPLY SELF-ADHESIVE FEET TO
BACK OF SPEAKERS.
SWITCH