C.B.S. Scientific LDASG-400-20 - Manual (Page 12)

www.cbsscientific.com 12 Large Format Vertical
3.5 Removing the Gel
1. Turn the power supply off and disconnect the leads from the power supply. Remove the
safety cover from the unit, by placing thumbs on white posts next to red & black connectors,
then pushing down while pulling up with fingers under lid. DO NOT pull on power cords.
2. Drain upper reservoir using a pipette or syringe. Detach side clamps and remove gel
sandwich. Carefully separate, making sure that the gel remains attached to one plate. Stain
and fix according to your preferred method. Dispose of buffer according to your institutions
safety requirements.
3.6 Maximum Well/Comb Volumes
TABLE 1&2---THINNER Combs