C.B.S. Scientific MGU-303 - Manual (Page 5)

5 Mini-Fast Sub
SECTION 1
General Information
1.1
Introduction
The Mini-Fast Sub, cat. #MGU-303, features a simple and safe design. Gel casting is easily
accomplished by inserting the precision fit dams and comb into the grooves provided in the body
of the unit. The gel bed dimensions are 8cm (l) x 10cm (w). This uniplanar design has a buffer
chamber only slightly longer than the gel itself, minimizing the amount of buffer required.
1.2 Specifications
Constructions
Buffer chamber, lid Acrylic, UVT
Electrodes Platinum wire .012" diameter
Power cords FR Urethane, rated 7500V,
200mA, 65° C
Casting dams PVC
Combs PVC
Safety Certification EN61010-1-1993 (IEC1010-1)
MGU-303
Shipping weight 3lbs
Overall Size
(l)x(w)x(h)
17cm x 14cm x 8cm
Gel Size 7.5cm x 10cm
Recommended buffer
volume mls
50ml
Distance between
electrodes
9.5cm
Voltage limit 100VDC
1.2 Safety
Power to the MGU-303 unit is to be supplied by an external DC voltage power supply that must
be ground isolated so that the DC voltage output floats with respect to ground. For any power
supply used, the maximum specified operating parameters for the units are:
Maximum Limits
100VDC voltage
50 watts power
50 mA current
55°C ambient temperature
Current to the unit, provided from the external power supply, must enter the unit through the lid
assembly, providing a safety interlock to the user. Current to the unit is broken when the lid is
removed. Do not attempt to use the unit without the safety lid. Always turn the power
supply off before removing the lid, or when working with the unit in any way. Follow safety
precautions specified by the power supply manufacturer.