Online manual not for resale purposes – BLITZ Dual Turbo DC4 User Manual

Page 6

and 59 seconds.

SECOND button for the lap button.

BAR DISPLAY

To clear the time press the SECOND button and hold it down for 5 seconds.

the Lap mode. The Lap mode can display up to 5 recorded times.

the recorded times.

A and B switch

automatically.

Press the POWER button to turn on the turbo timer.

Page 6

Warning-All images and text in this manual is the property of BLITZ Co.,Ltd. (Japan).

No part of this may be reproduced, stored in retrieval systems, or transmitted in any form or means without prior written premission of

BLITZ Co.,Ltd. (Japan)

6 - Stop Watch

LCD DISPLAY

When the unit is first turned on press the POWER button six times to display
the Stop Watch mode. This can be used to record the time it takes to get to

CONTRAST

point A to point B. The Stop Watch will record times up to 9 minutes

When the FATT DC is turned off the user can adjust the contrast by
pressing the MINUTE and SECOND button. The user can adjust the

Use the MINUTE button for the Start and Stop Function keys. Use the

illumination between 0 to 100.

When the Turbo Timer is on Auto Timer E Mode the user can have different bar

To start and stop the Stop Watch press the MINUTE button.

displays. In order to do this select E - H or E - L mode in the Auto Timer setting.

Press the Second button to jump to another Lap. There is 5 Laps available.

When the E mode is activated the Bar Display will move side to side.

If the laps are full the LCD will display full when trying to record another Lap.

To change the Bar Display press the SECOND button down for 3 seconds
and the display will change. There will be 4 possible displays. 3 of the

7 - LAP TIMES

displays will be automatically moving and the fourth display will move

When the unit is first turned on press the POWER button seven times to display

according to the vehicle boost.

** This automatic back and fourth function only works on the E mode of the

Press the SECOND button once to scroll through

Auto Timer setting

and view the recorded lap times. Press the second
button and hold it down for 5seconds to CLEAR all

8 - Off

There is a switch on the control module. A is for most vehilcle applications.

When the unit is first turned on press the POWER button eight times to display

The B switch is for vehicles with low ignition pulses.

the Off mode. The leave the display on off mode and the FATT DC will turn off

Online Manual Not For Resale Purposes