Online manual not for resale purposes – BLITZ Full Auto DC4 User Manual

Page 6

6 - LAP TIMES

LCD DISPLAY

the Lap mode. The Lap mode can display up to 5 recorded times.

the recorded times.

BAR DISPLAY

7 - Off

automatically.

according to the vehicle ignition pulse.

Press the POWER button to turn on the turbo timer.

A and B switch

The B switch is for vehicles with low ignition pulses.

Page 6

Warning-All images and text in this manual is the property of BLITZ Co.,Ltd. (Japan).

No part of this may be reproduced, stored in retrieval systems, or transmitted in any form or means without prior written premission of

BLITZ Co.,Ltd. (Japan)

When the unit is first turned on press the POWER button six times to display

CONTRAST

When the FATT DC is turned off the user can adjust the contrast by

Press the SECOND button once to scroll through

pressing the MINUTE and SECOND button. The user can adjust the

and view the recorded lap times. Press the second

illumination between 0 to 100.

button and hold it down for 5seconds to CLEAR all

When the Turbo Timer is on Auto Timer E Mode the user can have different bar
displays. In order to do this select E - H or E - L mode in the Auto Timer setting.

When the unit is first turned on press the POWER button seven times to display

When the E mode is activated the Bar Display will move side to side.

the Off mode. The leave the display on off mode and the FATT DC will turn off

To change the Bar Display press the SECOND button down for 3 seconds
and the display will change. There will be 4 possible displays. 3 of the
displays will be automatically moving and the fourth display will move

** This automatic back and fourth function only works on the E mode of the
Auto Timer setting

There is a switch on the control module. A is for most vehilcle applications.

Online Manual Not For Resale Purposes