BLACKHAWK! SPECOPS NRS SHOTGUN STOCK - Manual (Page 5)

www.BLACKHAWK.com
BLACKHAWK! ® NORFOLK, VA U.S.A. 1.800.694.5263
SpecOps NRS Technical Information
Page 4
To ensure proper installation, check the following...
1. Stock aligned square with receiver.
2. Stock attached firmly against the receive with no gap.
Note: Remington owners, after installation there should be no gap between the stock and
receiver. If there is a consistent 1/16" gap between the stock and receiver verify that the
metal spacer has been removed. The spacer is not needed for installation of the SpecOps
NRS.
2
1