Beckett AQUASMART 7600WTM - Manual (Page 10)

10
Other Menu Items
Current Outdoor Air Temperature
(OAT):
See Screen 1 shown in Figure 5.
This screen displays the most recent outdoor
temperature received from the WTS, and the
hours and minutes since the last
transmission received.
Signal Strength:
See Screen 2 shown in Figure 5.
This screen displays a visual representation
of the connection strength between the AWM
and WTS. The number of darkened bars
(between 0 and 16, with 16 being the
strongest) indicates the strength. A
mimimum of 3 bars are recommended for
reliable operation, while at least 6 indicate a
good connection. Pressing the WTS button
once will update this value.
Current WTS Battery Life:
See Screen 3 shown in Figure 5.
1.
2.
1.
2.
1.
This screen displays the most recent report
of the battery life of the WTS in percentage
of battery life left and estimated years of
service left. If less than a year of service life
is expected, the screen will say “REPLACE”.
Adding Connections:
See Screen 9 shown in Figure 5.
This screen is used when linking two devices
when a new one has been added (see
Installation Section
).
Clearing Connections:
See Screen 10 shown in Figure 5.
This screen is used when clearing a link
between two devices that is no longer
needed (see Installation Section).
Broadcast Once:
See Screen 11 shown in Figure 5.
This screen may be used in linking
procedures with future Beckett wireless
products.
2.
1.
2.
1.
2.
1.
2.