BLACKHAWK! LEVEL 2 SERPA LIGHT BEARING FOR XIPHOS NT - Manual (Page 13)

3. Release the Pivot Guard thumb release while holding the Pivot Guard closed. The Pivot Guard should stay
in place.
4. Press the Pivot Guard thumb release again to release the Pivot Guard. The Pivot Guard should immediately
spring away from the firearm and not interfere with the firearm as it is being drawn from the holster.
5. Repeat this process several times to ensure proper functioning.
2.5 Aftermarket Firearm Accessories/Modifications
WARNING!: Never use your SERPA ® holster with a firearm that has been modified with a trigger shoe,
oversized sights or wide target trigger or hammer. Do not use with any other aftermarket firearm acces-
sory unless you first test to make sure it does not affect the safe performance of your firearm. Use with
incompatible, modified or improperly installed accessories can cause an unintended discharge or damage
to your firearm.
• With your firearm unloaded, repeatedly test your holster to ensure that accessories do not interfere with
any retention devices or the safe holstering or drawing from your holster.
• Since BLACKHAWK! ® cannot possibly design or test its holsters for compatibility with all possible aftermarket firearm
accessories, user assumes all risk and liability associated with use of firearm with any aftermarket accessories.
13