Bedrug BED LINERS: BedTred Pro Series - Manual (Page 6)

Care and Warranty
BedTred Truck Bed Liner Installation
BedTred ® CLEANING INSTRUCTIONS
The mildew resistant BedTred foam will not absorb liquids. The engineered polypropylene fiber surfaces
resist stains and deterioration from most acids, chemicals, gasoline and oils, etc. Therefore, by following
the cleaning instructions below, your BedTred will remain serviceable for as long as you own your truck.
Cleaning your BedTred is easy:
1. A vacuum, broom, brush or compressed air can be used to remove dirt, grime, sand, mulch, etc. Due
to the fact that water will not harm the BedTred, pressure washing is also an effective way to clean
a soiled BedTred product. Also, the BedTred floor panel may be taken out to remove any trapped
material before it can damage your truck's paint finish.
2. Although most acids will not harm the BedTred, baking soda should be applied immediately to
neutralize the acid to ensure the safety of the paint on the truck.
3. To clean tougher jobs such as gasoline, oil, chemicals, acid spills or leaks from your BedTred, use
a detergent soap with degreaser and water, then rinse thoroughly. This detergent soap is used in most
car wash locations with pressure washing equipment. The BedTred polypropylene closed-cell foam
will not absorb water and the polypropylene fiber dries in minutes.
If you have additional questions, call BedRug, Inc. customer service at 800-462-8435.
Retain these cleaning instructions with your vehicle owner's manual for future reference.
BedRug, Inc.
LIMITED WARRANTY
BedRug, Inc. warrants BedRug, BedTred, VanRug, and VanTred, for pickup trucks and vans to be free from
defects in materials and workmanship. BedRug bedliners will be warranted for the duration of the vehicle
ownership by the original BedRug purchaser. The terms of this warranty may vary from state to state. You
may have rights under specific state laws that differ from the terms of this warranty. Proof of purchase will
be required for warranty service. Customer modifications and/or improper return packaging of the product
may void this warranty. Product should be cleaned before returning. For warranty instructions, returns and
packaging contact BedRug, Inc. Customer Service at 800-462-8435. Labor and shipping are not covered
under the terms of this agreement.
Retain this warranty information with your vehicle owner's manual for future reference.
FOR WARRANTY SERVICE, CALL 800-462-8435
BTPROINST Rev. 1 12/13/2010 Page 6 of 6