Bedrug BED LINERS: BedTred Pro Series - Manual (Page 5)

13. Prepare BedTred Tailgate Panel
Attach 1x60 Hook Fasteners to both the top
and bottom edge of tailgate as shown.
Clean hook attachment areas with alcohol
and let dry.
Place Tailgate Panel in proper location.
Remove backing tape and attach top 1"x
60" fastener.
Press firmly in place.
Remove backing tape and attach bottom
1"x 60" fastener to truck tailgate.
Press firmly in place.
Procedure
BedTred Truck Bed Liner Installation
14. Attach Tailgate Panel to Truck
If your truck has a plastic tailgate cap. After
cleaning with alcohol, apply Adhesive
Promotor to the plastic tailgate cap before
attaching Hook Fastener.
Tailgate Cap
You have now completed the BedTred
Installation.
12. Finish attaching BedTred Floor Panel
Turn the rear flap of the Floor Panel and
wipe the truck bed with alcohol and let dry.
Remove the backing tape and then secure
the BedTred Floor Panel starting in the
middle and pressing out to each side.
BTPROINST Rev. 1 12/13/2010 Page 5 of 6