Barnett Engineering PRO TALK CV2 - Manual (Page 49)

Voice Storage and Configuration with the Telset 6-7
B1272M001 BARNETT ENGINEERING LTD. ProTalk Cv2
Exit to Main Menu
Accept alarm format and advance to Debounce Scale
Debounce Scale
Cv2: “Alarm Timer is seconds”
You: Change debounce scale to seconds
Change debounce scale to minutes
Exit to Main Menu
Accept debounce scale and advance to Debounce Time
Debounce Time
Cv2: “Alarm Timer is 01 seconds”
You: Change timer to 5 seconds (range: 0-6 sec, 1-255 min)
Exit to Main Menu
Accept debounce timer and exit to Main Menu
Control Output Menu (Basic mode only)
Output Format
Cv2: “Control 1 is On/Off"
You: Change format to on/off operation
Change format to timed operation
Exit to Main Menu
Accept output format and advance to next output or Main Menu
Change Format
Cv2: “Format is On/Off”
You: Change format to on/off operation
Change format to timed operation
Exit to Control Output Menu
Accept output format and advance to On Code
On Code
Cv2: “On Code is empty”
You: Change on code to 11 (max 8 digits)
Erase on code
Accept on code and advance to Off Code
Off Code
Cv2: “Off Code is empty”
You: Change off code to 11 (max 8 digits)
Erase off code
Accept off code and return to Control Output Menu (type = On/Off)
or advance to Timer Scale (type = timed)