BASELINE Lift BLMR06 - Manual (Page 21)

21
Problem Possible Causes Solutions
Slow Drift
Down 1. Mechanical safety locks not
engaged
2. Powerpack lowering valve
contamination
3. Hydraulic system leaks
1. Raise lift to engage all safety locks then lower
lift and confirm all safety locks are engaged
2. Back flush powerpack by opening manual
over-right valve. Engage "up" switch and down
lever at the same time and run approximately
10 seconds
3. Check cylinder and all fittings for any hydraulic
oil leak
Replace all worn or broken parts and components only with
manufacturer approved/supplied parts and components
Replacement parts may be purchased from your local lift supplier or the
manufacturer at 1 - 800 - 688 - 6359