Barranca Diamond HP18 Slab Saw - Manual (Page 9)

9
Model# HP18 HP18 HP24
Motor Baldor Baldor Baldor
Horsepower 1.5 Hp 1.5 Hp 1.5 Hp
Voltage 120V / 60 Hz 120V / 60 Hz 120V / 60 Hz
Amperage 8 8 8
Motor RPM 1725 1725 1725
Blade RPM 700 700 500
Arbor Size 1” 1” 1”
Blade capacity 16”- 20” 16”- 20” 20”- 24”
Depth of Cut 7.5" (w/ 18" Blade) 8" (w/ 20" Blade) 10” (w/ 24"
Blade)
Vise Opening 8” 8” 17”
Blade Included 18" 301 or 303S 20" 301 or 303S 24” 301 or 303S
Saw L x W x H 51” x 37” x 49” 51” x 37” x 49” 65” x 37” x 48”
Dry Weight 580 lbs. 580 lbs. 720 lbs.
Part Number 8302018 8302020 8302024
MOTOR
Single Phase, Continuous Duty commercial grade motor with automatic thermal overload protection.
Manual reset button on HP18 and HP24 Baldor motors. Export motor 230 volts 50Hz can be ordered
with either saw.
FEED MECHANISM
Stainless steel screw rod with silicon bronze threaded clutch block engagement system. Silicon bronze
spur to hardened steel worm gear to belt pulley drive.
LUBRICATING SYSTEM
Blade splash system using petroleum or mineral oil based lubricant. Water should NEVER be used as
a lubricant in any of the Highland Precision series saws as it will adversely affect cutting performance,
blade life, power feed, iron/steel components, and create bearing problems with the saw.
LUBRICANT REFERENCE
HP18: 9-1/4 gallons with 18” blade, 4-1/4 gallons with 20” blade.
HP24: 19 gallons with 24” blade
Refer to page 12
CARRIAGE & VISE MATERIAL
Cast Iron.
CARRIAGE RAILS
Steel rod.
HP18 & HP24 SPECIFICATION