Barranca Diamond HP18 Slab Saw - Manual (Page 17)

17
Adjusting countersink screw Adjusting allen head screw
This adjustment will help the clutch block shoe to snugly engage the stainless steel feed screw by ap-
plying pressure to the brass pressure block below the carriage casting. Should you have trouble with
this adjustment, call Barranca Diamond at (800) 630-7682 for factory assistance in clutch adjustment.
Brass pressure block, feed
screw & clutch block shoe
Feed screw & clutch block shoe
Periodically, it will be necessary to replace the silicon bronze clutch block shoe once the 5/8"-18
threads are flattened or stripped. You may purchase the clutch block and pressure block direct from
the factory. See parts lists on pages 27 & 33 to order correct parts by part number and description of
part(s).
HP18 & HP24 STARTUP & ADJUSTMENT