Autoquip FREIGHTLIFT FL4M - Manual (Page 87)

87
DANGER !
To avoid personal injury or death, all maintenance procedures described in
this section should only be performed by qualified service personnel.
DANGER !
To avoid personal injury or death, do not operate this equipment with
substandard, defective, or missing parts. Contact a local FREIGHTLIFT
service representative if a deficiency is found.
WARNING !
To avoid serious injury or death, GUARDS, INTERLOCKS, and SAFETY
DEVICES must be restored to correct operation when installing parts or
making repairs.
INSPECTION & MAINTENANCE SCHEDULE
The following inspection & maintenance schedule is based on an average annual usage
of approximately 5,000 hours per year. Special applications such as high cycle,
extreme temperatures, outdoor or wash-down applications, corrosive environments, and
contaminated environments will require more frequent maintenance – and possibly
different lubricants. Special ordered lift features may also require maintenance and are
not included in the following schedules.
If you have any questions or problems, please feel free to contact you local service
representative or the Autoquip Service Department for assistance (888-811-9876).
Every Month (300-400 hours of operation):
1. Check all components for signs of noise, vibration, erratic movement, and any
other abnormal behavior.
2. Check overall condition of unit (i.e. bends, breaks, loose or missing bolts, etc.).
3. Look for any unusual rub marks on the guides, wall, platform carriage, masts, etc,
which might indicate misalignment of the components due to overloading, misuse,
or something out of tolerance.
4. Using a long handled broom or other implement, remove any debris from under the
platform carriage or in the enclosed area.
ROUTINE MAINTENANCE