Autoquip FREIGHTLIFT FL4M - Manual (Page 18)

18
Standard FL4M Models
Model Max
Travel
Capacity
(pounds)
Platform
(Min)
W x L
Platform
(Max)
W x L
HP**
(Min)
Standard
Speed
(fpm)
FL4M-6 100’ 6,000 6’ X 6’ 12’ x 15’ 7.5 25
FL4M-8 100’ 8,000 6’ X 6’ 12 x 15’ 7.5 25
FL4M-10 100’ 10,000 6’ X 6’ 12’ x 15’ 10 25
FL4M-12 100’ 12,000 6’ X 6’ 12’ x 15’ 10 25
FL4M-15 100’ 15,000 6’ X 6’ 12’ x 15’ 15 25
** Actual HP varies depending on the total hung weight of the loaded carriage and the
particular speed required for the application.
DO NOT EXCEED RATED CAPACITY OF THE LIFT. Loading the lift beyond its rated
capacity is unsafe, will shorten the operational life of the lift, and will void its warranty.
WARNING!
Do not make modifications to the lift without authorization from the
manufacturer! Unauthorized and unforeseen carriage, lift structure,
drive base or support bracing attachments added in the field could
create an unsafe operating condition which could result in severe
personal injury or death.
LIFT DUTY
Autoquip standard lift designs as described in the specifications are designed to “cycle”
(one complete “up” and one complete “down” lift operation) no more frequently than
every two minutes – or approximately 10,000 times (cycles) per year. This is
considered “normal” duty.
It is the responsibility of the user to notify Autoquip whenever a specific application is
likely to demand “above normal” duty from the lift - in excess of 10,000 cycles per year.
Above normal duty typically requires supplemental design features to enhance the
serviceable life of the lift & to avoid loss of warranty.
GENERAL SPECIFICATIONS