Autoquip BASCULE BRIDGE - DOUBLE LEAF - Manual (Page 33)

GENERAL MAINTENANCE
20. Turn the electrical supply back on and press the “UP” button on the controller to
raise the bridge. NOTE: 15 to 30 seconds time may elapse to fill the empty
cylinders before movement is noted.
21. Press the “DOWN” button on the controller to cycle the lift to the fully lowered
position. Hold the “DOWN” button 30 to 40 seconds to allow air in the cylinders to
bleed back into the reservoir tank.
22. Cycle the bridge 10 to 15 times and repeat the bleeding operation by holding the
”DOWN” button for 30 to 40 seconds.
23. Check the oil level in the reservoir with the bridge in the fully lowered position. Add
as necessary (see “Routine Maintenance” for oil recommendations).
24. Clean the oil filler breather cap if it appears dirty.
25. Clean up any debris and or spilled oil from the area.
33