Autoquip BASCULE BRIDGE - DOUBLE LEAF - Manual (Page 28)

Normally the Bascule Bridge will require very little maintenance. However, a routine
maintenance program could prevent costly replacement of parts and/or downtime.
DANGER!
ROUTINE MAINTENANCE
To avoid personal injury, NEVER go under the bridge or perform any
maintenance until the load is removed and the bridge is securely blocked.
See "Blocking Instructions" section.
MONTHLY INSPECTION:
1. Check oil level (see oil recommendations in this section) and add appropriate oil
when necessary.
2. Check for any visible leaks. Correct as necessary.
3. Check any unusual noise when it occurs. Determine the source and correct as
necessary.
4. Check the safety wing hinges for rust or dirt. Clean and lubricate.
5. Check the ram plunger surface for rust, scoring, or damage.
6. Check all wiring for looseness or wear. Repair at once.
OIL REQUIREMENTS:
Change oil yearly, or more frequently if it darkens materially or feels gummy or gritty.
Use detergent motor oils only. Do not use hydraulic-jack oil, hydraulic fluids, brake
fluids, or automatic transmission fluid.
28