Autoquip SERIES 35 TILTERS - Manual (Page 5)

5
DANGER!
Tilters are designed individually for a specific load and application. To
avoid personal injury, do not change the load or application from the
original design.
WARNING!
NEVER stand, sit or ride on the tilter.
WARNING!
All warning and information decals should be in place as outlined in the
“Label Identification” section. If decals are missing or damaged, they
should be replaced with new ones. Contact Autoquip for replacements.
WARNING!
Do not attempt to remove the velocity fuse until the maintenance block
securely supports the tilter and all hydraulic pressure has been removed
from the tilting cylinders and hydraulic hoses. Failure to do so could results
in personal injury or death!
WARNING!
Tilter platforms traveling below floor levels my create openings, and the
shape of the load and how the load is arranged on the tilter may create a
toe hazard as the load passes the top edge of the pit. Both situations may
require guarding in accordance with Federal Regulations. Any such
guarding must be installed prior to operating the tilter.
.
DANGERS, WARNINGS & CAUTIONS