Lift blocking instructions, Warning – Autoquip AIR FORCE PNEUMATIC User Manual
Page 11
11
1.
Remove all load from the platform. Never block the lift when loaded, only when
empty.
2.
Raise the lift platform sufficiently to install the maintenance leg.
3.
Begin lowering the platform by activating the “DOWN” valve until the
maintenance leg is captured by the socket on the underside of the platform and
the locating disc on the base frame. Continue activating the “DOWN” valve five
to ten seconds to relieve the air pressure in the air bag.
4.
Always shut off the main air supply, when blocked, to prevent someone from
turning it on.
5.
To remove the maintenance leg, raise the platform by activating the “UP” valve to
provide sufficient clearance for the removal of the maintenance leg.
WARNING!
To avoid personal injury, NEVER go under the lift platform until
the load is removed and the scissors mechanism is securely
blocked in the open position.
LIFT BLOCKING INSTRUCTIONS