Bryston 2BSST User Manual

Page 5

2Bsst SPECIFICATIONS:

Power Output:

100 watts per channel into 8 ohms

Input Impedance:

10K ohms single ended (unbalanced)

15K ohms double ended (balanced)

Sensitivity:

2v setting

2 Volts in = 100 Watts into 8 ohms - gain 23 dB

1v setting

1 Volt in = 100 Watts into 8 ohms - gain 29 dB

Distortion:

THD+noise:

< 0.010% 20Hz to 20kHz at 100 watts into 8 ohms,

IMD:

< 0.010% 60Hz + 7KHz mixed 4:1

Noise:

Measured with input shorted - 20Hz to 20kHz.

>108dB below rated output (with 20Hz to 22KHz bandpass filter)

Slew Rate:

>60 volts per microsecond

Power Bandwidth:

<1 Hz to over 100 kHz

Damping Factor:

Over 500 at 20 Hz, ref. 8 ohms

Power consumption: idle 30va, maximum power 600va

Heat load:

idle 100 btu/hr., max power 288 btu/hr

Dimensions:

Regular model: Front Panel: 17.2” x 4”

Body:

16.9” wide X 3.5” high X 15.1” deep

(depth includes front panel and protrusion of rear panel connectors)

PRO model:

Front Panel:

19” x 3.5” (2 rack units)

Body:

16.9” wide X 3.5” high X 15.1” deep

(depth includes front panel and protrusion of rear panel connectors)

Weight:

approx. 28 lbs (12.7kg.)

2BSST

TWO CHANNEL POWER AMPLIFIER