Artograph LED 500 Owners Manual - Manual (Page 41)

41 3D FUNCTION
CAUTION
y y Extra special care is required for chil-
dren watching a 3D video.
When Watching 3D Video
y y Watch 3D images within the optimum
viewing angle and distance.
y y If you are outside the viewing angle
or distance, you may not be able to
watch 3D images. You cannot view
3D images when you lie down.
y y You may see left and right images
overlapped during projector initializa-
tion after it is powered on. It may take
some time for optimization.
y y It may take some time for the 3D
image look normal after you turn your
eyes away from the screen and look
back at the 3D image.
y y It may flicker slightly while watching
3D images under a 3 wavelength
lamp fluorescent light (50 Hz - 60
Hz) or near windows. If so, it is rec-
ommended to block the sun light
with a curtain and to dim the lights.
y y The 3D glasses must be DLP-LINK
(DLP Ready) type.
y y You may not be able to watch 3D
properly if there is an obstacle be-
tween the projector and 3D glasses.
y y Install the 3D projector as far as pos-
sible from other devices.
Please check the following when using
3D glasses.
y y Do not use 3D glasses as ordinary
glasses, sunglasses or protective
goggles.
- If you do so, this may cause injury.
y y Do not store 3D glasses in very hot
or very cold conditions. If you do, this
may cause them to become distort-
ed. Do not use distorted glasses.
y y Do not drop 3D glasses or allow them
to come into contact with other ob-
jects.
- This can result in damage to the
product.
y y The lenses of 3D glasses are easily
scratched. Use a soft clean cloth
when cleaning them.
- Foreign particles on the cloth may
cause scratches.
y y Do not scratch the surface of the 3D
glasses' lenses with sharp objects or
wipe them with chemicals.
- If the lenses get scratched, images
may not look normal when viewing
3D.
y y Please use 3D glasses certified by
your dealer or Service Center.