Bulldog Security RS82 - Manual (Page 2)

SYSTEM FEATURES
SYSTEM COMPONENTS
TECHNICAL ASSISTANCE
BEFORE YOU BEGIN
1
REQUIRED TOOLS
Two-Button Extended Range Remotely start your car to run the heater or air conditioning from an extended distance.
Remote Control
Two-Way Capability Works with your factory keyless remote transmitter (RS85 only) or the transmitter included with
this kit.
Parking Light Confirmation Confirms that your vehicle has received a remote signal and will remain on if the engine is
remotely started. (Optional part #775 required.)
Code Learning Allows your remote starter to learn new remotes, should you want to add remotes, or if remotes
are lost.
Pre Programmed Run Time Unit is programmed to run for 15 minutes or stop at any time with the remote, by pressing the
brake or by opening the hood.
Pit Stop Mode Allows you to exit the vehicle while the engine remains running.
Tach/Tachless Option A programmable feature that lets you decide to choose the easy to install tachless operation
or the wire-in, tach operation.
Limited Lifetime Warranty Guarantees life-long protection.
Your system includes:
1- Main Control Module
1- Two Button Remote Transmitter
1- 11-Pin Wire Harness
1- 3-Pin 4-Relay Harness
1- Hood Pin Switch
Unless your remote starter includes a Bonus Installation Kit you will need the following items: a sharp
knife, electrical tape and a computer-friendly test light. A 5/16 inch drill bit may be needed to install
the hood pin switch. If the bottom of your dash on the driver’s side will come off, you must remove it.
If this is the case a screwdriver or a wrench may be needed,
1- Warranty
1- Warning Sticker for Under the Hood
1- Installation & Operation Guide
1- Bonus Installation Kit (with selected models including)
•Installation Video •Computer-friendly Test Light
•Electrical Tape •Wire Ties
•Razor Knife
Should you need help. First check our website at www.bulldogsecurity.com or call our toll-free Tech Support
Hotline Monday through Friday 9AM-8PM and Saturday 10AM-4PM EST at 800-878-8007.
You must give the following information:
•Name
•Telephone Number with Area Code (Fax number if applicable)
•Year, Make, and Model of the vehicle
•The model you are installing
•The type of assistance you are requesting
If you give the above information you will be called back as soon as possible.
Please do not skip any steps.
If your vehicle has an anti-theft system, you will need an additional module, Part #781 or #791.
Congratulations, you have purchased one of the most advanced remote starter systems ever made. Your new
remote starter is a technological breakthrough utilizing the most advanced, state of the art technology
and components. It is computer controlled and manufactured in the U.S.A. The dependability and variety of
features make Bulldog Security the leader in the industry. Enjoy your new remote starter for years to
come!
This remote system is designed to start your vehicle by sending a command signal from the remote transmitter.
It is important that your installation be done in a well-ventilated area. It is the responsibility of
the owner to ensure that the remote system is not used to start the vehicle in an undesired location.
It is recommended that a carbon monoxide detector be installed in the living area near a location where
the vehicle may be garaged.