APG PT-400 Pressure Transducer datasheet - Manual (Page 2)

PT-400 Specifications
Performance
• Accuracy (linearity & hysteresis):
±0.25% of full scale (BFSL)
• Standard Pressure Ranges: 0 - 40,000 psi
• Stability - One Year Zero Drift:
17-4 / 316L: <±0.5% FS
• Overpressure: 2x full scale
• Burst Pressure: up to 3x full scale or limit of
process connection
• Frequency Response:
Less than 5mS
Connectivity
• Output:
4-20 mA (2 wire, loop-powered)
0-5 VDC, 0-10 VDC (non-isolated 3 wire)
Modbus/RTU (RS-485) with temp. output
Environmental
• Standard Compensated Temp.: 0º to 130ºF
(-17º to 54ºC)
• Storage Temp: -40º to 180º F (-40º to 82ºC)
• Operating Temp: -40º to 185º F (-40º to 82º C)
Physical
• Weight: 10 oz. (283 g) typical
• Wetted Materials: 17-4 SS, 316L SS
Electrical
• Supply Voltage: 9-28 VDC
• Electrical Connection:
Pigtail with cable or connector
• Electrical Protection:
Protected against reverse polarity, surge
per IEC 61000-4-5
Certification
• CSA/cCSAus Contract #237484
Ambient: -40º to 85ºC
0-5 VDC, 0-10 VDC, 4-20mA
- IS: Class 1, Div. 2, Groups C & D; Ex nL IIB T4
- Class 1, Zone 2; AEx nL IIB T4
4-20 mA
- IS: Class 1, Div. 1; Groups C & D; Ex ia IIB T4
- Class 1, Zone 0; AEx ia IIB T4
• ATEX
4-20 mA
- Ex II 1G Ex ia IIB T4 Ga
• IECEx
4-20 mA
- Ex ia IIB T4 Ga
Automation Products Group, Inc. www.apgsensors.com
tel. 888.525.7300 [email protected]
2 7/31/2013
2.50”
63.5 mm
0.55”
13.97 mm
1.50”
38.10 mm
6 pin
Connector
3.90”
99.06 mm
*Overall length may vary depending on process connection.