Anchor MESH POOL COVER - Manual (Page 10)

10
INSTALLING BRASS ANCHORS AT CORNERS
FIG. 3
90º
90º
1”
1”
STEP 8: INSPECTION AND CLEAN-UP
CALL ANCHOR POOL COVER SALES @ 1-800-255-5552
TO CLARIFY INSTALLATION INSTRUCTION
QUESTIONS.
1) After the cover has been installed, look for any area (besides that reinforcement attached to
the cover during manufacturing) that may need protective padding on the underneath side of
cover. On site padding may consist of carpeting, vinyl liner remnants, etc.
Complete the installation by sweeping any concrete dust and tucking the straps under the cover.
Deliver the door knob pack with warranty and user information to the homeowner.
STEP 7: READJUST COVER
1) Once cover is anchored, re-adjust straps as needed. Cover should be very taut across the
pool. With proper tensioning, springs should be approximately half compressed.
UNTENSIONED APPROXIMATELY HALF
TENSIONED