beautypg.com

Mic and filter controls – Allen&Heath Xone 23C User Manual

Page 9

background image

9

MIC AND FILTER CONTROLS

Filter Resonance control

Changes the “Q” or sharpness
of the VCF.

Mild will give a smooth filter
sound, Wild will make the
filter sound more pronounced
(sharper “Q”)

Filter type select

HPF - allows signals above the
cut-off frequency to pass.

LPF - allows signals below the
cut-off frequency to pass

FX loop on switch

Press this switch to activate
the external effect loop. Leave
switched off if an external
effects unit is not connected

Filter Frequency

Sets the cut off frequency of
the VCF filter

Microphone EQ

2 band EQ for adjusting the
tonal balance of the DJ mic

Microphone input

Professional XLR balanced mic
input. Use a low impedance
dynamic hypercardioid Mic for
best results.

Microphone Level

Adjusts the signal level of the
mic input. If you are not using
the mic, turn to minimum to
prevent noise pick up.

This manual is related to the following products: