Allen&Heath iLive Tweak - Manual (Page 3)

AP8263 Allen & Heath Limited www.allen-heath.com www.ilive-digital.com
Connecting and using iLive Tweak
To launch the iLive Tweak application, click on the icon on the iPhone / iPad home screen
(Fig 1). Once launched the user can then select an iLive MixRack (Fig 2).
If no units are visible, ensure the iLive MixRack is powered on and the Wi-Fi has been
correctly configured and is connnected. An icon showing Wi-Fi signal strength should be
present in the toolbar at the top of the iPad / iPhone screen. The CAT 5 cable connecting the
wireless access point to the iLive should also be checked.
After selecting a MixRack and pressing the ‘Connect’ button, a user must be selected and a
password may need to be provided(Fig 3). This password is defined for each user in the
user profiles stored in the MixRack, and can be set using the iLive Editor software or an iLive
Control Surface.
Fig 1 Fig 2 Fig 3
Once connected, a menu organised by channel type (Fig 4) allows the user to select a
channel. The user can then control level & mute, delay, EQ (Fig 5) and GEQ (Fig 6) where
appropriate by swiping left and right. To return to the menu use the ’Channel Selector’ button
at the top of the screen.
Fig 4 Fig 5 Fig 6