Allen&Heath MixWizard3 14-4-2 - Manual (Page 7)

WZ 3 14:4:2 User Guide 7
Introducing the MixWizard WZ 3 14:4:2
The Allen & Heath MixWizard series of consoles includes several models. This user guide
describes the WZ
3 14:4:2 4 group model. The 2 bus WZ 3 12:2 and WZ 3 16:2, and the stereo
input WZ20S consoles are described in separate publications. For further information on the
MixWizard series please refer to the Allen & Heath web site.
The MixWizard is a compact console designed for
professional sound mixing. It is built to the same
high standards as our top of the range consoles, with
individual circuit cards, potentiometers nutted to the
panel for absolute strength, steel chassis, and no
compromise circuit design ensuring the finest sonic
performance.
The console can be operated free standing or in a
19” rack or flightcase. It is supplied with protective
side trims fitted. These can be removed for rack
mounting. The rear connector pod can be easily
rotated for rear facing or underside connectors when
rack mounted.
With its 4 band semi-parametric EQ, 4 groups, 6
auxes and stereo main output the WZ
3 14:4:2 is
equally at home mixing live shows, recordings and
corporate events. Tamperproof recessed switches
configure the console for optimum FOH or stage
monitor operation. This ‘dual functionality’,
pioneered by Allen & Heath, gives the console its
unique ability to properly function as Front-of-House
or stage monitor, or handle both at the same time,
ideal as a hard working work horse for hire stock,
touring and installed sound.
The WZ 3 14:4:2 has 10 mono mic/line inputs, 2 fully
featured dual input stereo channels and a 2-track
replay input, a total of 20 inputs to the mix. Of
special note is the addition of a 2 x 6 way matrix
providing a useful multi-purpose output for those
special demands such as recording and broadcast
feeds, delay fills, zone feeds and so on. A host of
top end features are provided including oscillator and
pink noise generator, individual talkback to all
outputs, comprehensive engineer’s metering and
monitoring, a lamp socket, and a dual redundant
backup power supply input.
The base of the console can be removed to access
internal pluggable option jumpers. These configure
user preference for the aux sends, direct outputs and
talkback mic phantom power. The aux and matrix
outputs are impedance balanced but may be
electronically balanced if required by fitting an
optional part. A kit is also available to fit the optional
Sys-Link II input/output card which allows the
console to be linked to other Allen & Heath consoles.
Other accessories available include the Allen &
Heath MPS12 backup power supply and LEDlamp
gooseneck lamp with built-in dimmer.