Allen&Heath RPS10 - Manual (Page 3)

3
RPS10 Power Supply
INTRODUCING THE RPS10
The RPS10 is a linear power supply which, like other linear supplies, produces DC voltages by rectifying, smoothing and
regulating AC voltages from the secondary windings of a mains transformer.
Allen & Heath mixing consoles employ a number of DC voltage supply levels in their operation and these are provided at the
output of each unit.
IMPORTANT: Please read this manual carefully before connecting your
RPS10 power supply to the mains.
This manual covers the RPS10 unit, which has been designed to conform to BS EN 60065, equivalent to IEC 65 (1985) ed 5 and
BS415 1990, with CENELEC deviations.
Precautions and Safety instructions
General Precautions
Avoid storing or using the RPS10 in conditions of excessive heat or cold, or in positions where it is likely to be subjected to
vibration, dust or moisture. Do not use any liquids to clean the exterior of the unit: a soft, dry cloth or brush is ideal.
SOLVENTS MAY CAUSE DAMAGE TO PAINT OR PLASTIC PARTS
Handling and Transport
The RPS10 is supplied in a rugged carton box. If it is necessary to move the unit any distance after installation, it is recommended
that this carton is used to protect it. Be sure to disconnect all cabling before moving. If the RPS10 is to be moved regularly (e.g.
touring) it is recommended that it is installed in a foam lined case. At all times avoid applying excessive force to any switches or
connectors.
CONFORMS TO BS EN 60065 FOR SAFETY