beautypg.com

2 installation procedure, 1 install the hardware, 2 install the driver and utility – AirLive WT-2000PCI User Manual

Page 8

background image

AirLive WT-2000PCI User’s Manual


7

2 Installation Procedure

Before you proceed with the installation, please notice following descriptions.

Note1: The following installation was operated under Windows XP. (Procedures are similar for

Windows 98SE/Me/2000.)

Note2: If you have installed the Wireless PCI Card driver & utility before, please uninstall the old

version first.

2.1 Install the Hardware

A.

Turn off your computer and remove its cover.

B.

Insert the PCI card to an available PCI slot firmly.

C.

Secure this card to the rear of the computer chassis and put back the cover.

D.

Secure the antenna to the antenna connector of the card.

E.

Turn on the computer.


2.2 Install the Driver and Utility

A.

“Found New Hardware Wizard” is displayed after the PCI card is installed and the computer
is restarted. Click “Cancel”.