AirLive WN-301R - Manual (Page 23)

MAC Address Filter
Allow access
by … Use this feature to determine which Wireless stations can use
the Access Point. The options are:
• All Wireless Stations - All wireless stations can use the
access point, provided they have the correct SSID and secu-
rity settings.
• Trusted Wireless stations only - Only wireless stations
you designate as "Trusted" can use the Access Point, even
if they have the correct SSID and security settings.
This feature uses the MAC address to identify Wireless sta-
tions. The MAC address is a low-level network identifier
which is unique to each PC or network device.
To define the trusted wireless stations, use the "Set Sta-
tions" button.
Set Stations
Button Click this button to manage the trusted PC database.
WiFi Protect Setup
Enable WPS Enable this if you want to use Wireless WPS function.
AP PIN Code Use the default displayed value or click the Regenerate button to
have the new pin code in the field.
Input Client
PIN Code Enter the client’s PIN code in the field and click OK to add the
client device.
WDS
Enable WDS This feature allows you to make a completely wireless network
by using multiple access points without connecting them with a
wire LAN.
In order to make the WDS working successfully, the access
point must use the same channel, SSID, as well as the wireless
encryption method.
MAC Address
List Enter the MAC address(es) of the AP(s) into the fields to allow
the following access points to be connected to the wireless
router.
AirLive WN-301R User’s Manual 17