AirLive WL-5480USB-80 - Manual (Page 21)

21
Click on Change to configure the settings.
Channel: select the channel you want to use.
Basic Rate: select the applicable transfer rate.
SSID: enter the desired SSID for the access point.
Hide SSID (check box): check to disable the broadcast of SSID.
Click Apply to submit the changes.
Bridge Adapter: If you have another Ethernet card installed in your computer, you
can select the other Ethernet card as the bridge adapter. This will allow any wireless
client that is connected to the access point to be bridged to the wired network that the
other Ethernet card is connected to.