AirLive WL-5460CAM - Manual (Page 31)

- Default Level: Select this option to use the default
image settings of the camera.
• Quality: You can setup the image quality from this
pull-down list. The default setting is High.
• Capture Resolution: You can setup the image
resolution when you capture a still image. The default
setting is VGA(640*480).
- Custom Level: Select this option when you want to
customize the image configuration.
• Capture Resolution: You can setup the image
resolution when you capture a still image. The default
setting is VGA(640*480).
• Frame Rate (fps): Select the optimal setting
depending on your network status. The higher setting
can obtain better quality; however, it will use more
resource within your network.
• Bit Rate: You can setup bit rate of the image by
selecting Kbps or Mbps. The setting range is
AirLive WL-5460CAM User’s Manual 30