Sd wlan card configuration utility, Successfully – AirLive WL-1100SD User Manual

Page 6

Text mode
Original mode

successfully:

1. Soft reset the PDA (push Soft-reset Button of PDA)

* Some PDA may not require resetting but it should be safer to reset.

2. Insert the SD WLAN Card into the PDA
3. Check the LED on the SD WLAN Card. If steady Blue light is seen, the SD WLAN Card is active.
4. (Optional) To check the quality of the network connection, you should use the SD WLAN Card

configuration utility program as described in the next section

SD WLAN CARD CONFIGURATION UTILITY

1. Click Install Utility to perform utility installation.

2. Click “YES” to proceed the installation.

Step 2