AirLive WL-1000CAM - Manual (Page 34)

AirLive WL-1000CAM User’s Manual
33
You are allowed to enter another IP Address to change the setting.
Subnet Mask The wizard will auto search the Subnet Mask setting of the network and set
the camera in the same Subnet Mask.
You can enter another Subnet Mask to change the setting.
Gateway The wizard will auto search the Gateway setting of the network and set the
camera to use the same Gateway.
You can enter another Gateway to change the setting.
Video Port It defines the video stream port. The default value is ―4321‖.
Cancel Click ―Cancel‖ to stop wizard setting.
Finish Click ―Finish‖ to complete the camera setting.
When you finish the camera setting, you can click ―Ok‖ to run the ―Camera Viewer‖ immediately or click
―Cancel‖ to run the ―Camera Viewer‖ later.