AirLive WL-1000CAM - Manual (Page 10)

AirLive WL-1000CAM User’s Manual
9
2-3 Installation Procedure
1. Unpack the Internet Camera package and verify that all the items listed in the Chapter 2 are
provided.
2. Connect the Internet Camera to your network by attached the network cable from the switch/router
to the UTP port of the Internet Camera.
3. Connect the power adapter to the Internet Camera and plug the power adapter to power outlet. The
Internet Camera will be powered on. When the Internet Camera is ready, the Ready LED will light.
4. Make sure that you have installed correct VGA driver and DirectX 9.0 or above.
Note: It is highly recommended to use the power adapter shipped with the Internet Camera, do NOT
use any other power adapter from any sources.