AirLive Traveler3GM - Manual (Page 89)

4. Troubleshooting
Traveler3G M User‟s Manual
4
4. Troubleshooting
This Chapter provides solutions to problems for the installation and operation of the
WiFi Mobi-HSPA Router. You can refer to the following if you are having problems.
1
Why can’t I configure the router even the WiFi is connecting ?
Do a Ping test to make sure that the WiFi Mobi-HSPA Router is responding.
Note: It is recommended that you use an Ethernet connection to configure it
Go to Start > Run.
1. Type cmd.
2. Press OK.
3. Type ipconfig to get the IP of default Router.
4.
Type “ping 192.168.1.1”. Assure that you ping the correct IP Address
assigned to the WiFi Mobi-HSPA Router. It will show four replies if you
ping correctly.