AirLive ST-SD20 - Manual (Page 10)

3. Configure Smart Tracking via Web Browser
AirLive ST-SD20 User’s Manual 7
3.3 Max Limited Setting
This setting menu allows the users to define a tracking area for the detection and tracking
movement of the camera.
z
Turn Off
To avoid the setting process being disturbed by the camera’s tracking movement,
please click on the button to switch off the tracking function.
NOTE: The Smart tracking function needs to be reactivated to take effect
after saving all the necessary settings. Please follow the steps below.
z
Select under at the top.
z
Click the button for confirmation.
z
Select under at the top.
z
Click the button to confirm the settings.
z
Enable tilt limit
Tick the box to enable the tilt limit setting.
z
Get U Tilt / D Tilt
Please click and drag the PTZ pointer in the view window to the desired up or down tilt
position. Then click on the / button to get the boundary
values.
z
Enable pan limit
Tick the box to enable the pan limit setting.
z
Get L Pan / R Pan
Please click and drag the PTZ pointer in the view window to the desired left or right
pan position. Then click on the / button to get the boundary
values.
Save: Click on to confirm the settings.