AirLive PoE-2600HD - Manual (Page 63)

4. Administrating the Device
59 AirLive PoE-2600HD/
WN-2600HD User’s Manual
4.3.3 Maintenance
z Hard Factory Default (Include the network setting):
Recall the device hard factory default settings. Note that click this button will reset all
device’s parameters to the factory settings (including the IP address).
z Factory Default (Except the network setting):
The unit is restarted and most current settings are reset to factory default values. This
action will not reset the network setting.
z Backup Setting:
To take a backup of all of the parameters, click this button. If necessary, it will then be
possible to return to the previous settings, if settings are changed and there is
unexpected behavior.