AirLive P-201U - Manual (Page 91)

9.4 Modify Setting Values – “set” Command
“set” command is used to modify the setting values of this print server.
The format of “set” command is as following:
set argument_name value
Then the value will be written into the system configuration. For example,
if you want to set IP address of the print server to 192.168.2.2, type “set ip
‘192.168.2.2’” command and the IP of the print server will be changed:
admin# set ip 192.168.2.2
If you enter only “set”, the system will list all arguments of “set”
command and the command format.
The following table lists all the arguments whose value can be modified by
“set” command:
Argument Description Example
psname Print server name set psname PS001
password Login password set password 1234
username Login username set username admin
ip IP of the print server set ip 192.168.2.2
gateway Default gateway of the
print server set gateway 192.168.2.
254
submask Subnet mask of the print
server set submask 255.255.
255.0
polling Polling interval (in
second) of the print
server for waiting
printing jobs on the
NetWare server Set polling 3
aq1 Name of the printer queue
on the NetWare server set aq1 PQ1
applezone The name of AppleTalk
zone that this print
server joins to set applezone Apple
Argument Description Example
printertype1 The type of the printer
attached to this print
server set printertype1 LaserW
Riter
SMBDG The name of the SMB group
name that this print
server joins to set SMBDG default
86