AirLive OV-1200 series - Manual (Page 5)

Connecting to Power
1. This Converter is a plug-and-play device.
2. Connect the supplied AC to DC power adaptor with a power voltage of 7.5Vdc/1.5Amp
to the DC-Jack on the converter, and then attach the plug into a standard AC outlet.
Installing in a Chassis
The Converter can be fit into any of the expansion slots on a special designed chassis.
y First, install the converter onto a carrier supplied with the chassis:
Step 1- Unscrew and pull out the media converter board.
Step 2- Plug in the media board to any of the vacant slot.
Step 3- Fit the converter onto the carrier and use the screw to secure it.
2
AirLive OV-1200SLC/20 User’s Manual