5 install the camera in lan – AirLive OD-2060HD User Manual

Page 12

1. Introduction

AirLive OD-2060HD User’s Manual

1. Use screws to fix the camera on the ceiling.

2. Fix the cover.

3. Connect the IP camera to the PoE switch.

1.5 Install the Camera in LAN

1. Plug an Ethernet cable into the Camera

Connect an Ethernet cable to the RJ-45 socket.

2. Connect the external power supply to Camera

If you do not use a PoE switch, you need to connect the attached power adapter to the

DC power jack of the camera.

Note: Use the power adapter, 12VDC, included in the package and connect it to wall outlet

for AC power.

Once you have installed the camera well and powered it on, the power LED will turn on

later. The power LED turned on, it means the system is booting up successfully.

Furthermore, if you have a proper network connection, and access to the camera, the LED

will flash blue under wired mode.