AirLive MU-5000FS A2 - Manual (Page 9)

- 9 -
LEDs
There are three LEDs on the front panel (four for wireless model):
LEDs Description
Power A steady Green light confirms that the file server is
powered on.
LAN A steady Green light confirms that the file server has
a good connection to your network.
When it blinks, the file server is receiving/transmitting
data from/to the network.
WLAN
(for wireless
model) A steady Green light confirms that the file server has
a good connection to your wireless network.
When it blinks, the file server is receiving/transmitting
data from/to the wireless network.
Mode
(green/red) Off: no devices attached to the file server.
Green : when you connect a USB device to the file
server, it starts blinking Green slowly; when the
system has detected the device, it lights Green steadily
to indicate that the attached device is OK.
Red : when you press the Unmount Button to remove
the attached device, it starts blinking Red slowly. If
the last connected device failed, it lights Red steadily;
you have to re-connect the device.
Reset Button
Press and hold the Reset Button for 4 seconds to reset the file server.
Unmount Button
Press this button to remove the connected USB device safely.