AirLive EtherWe-1000U User Manual

Page 13

AirLive EtherWe‐1000U User’s Manual

Now you are ready to configure the network settings for network access.

You must use the command line to install the driver as instructed above.

Simply copy and paste EtherWe-1000U.kext to the Extensions folder

will lead to an improper installation as the warning message below:

Now the installation is complete. You can connect the adapter to a network device by an

Ethernet cable:

1. Connect an Ethernet cable to the Ethernet port on the adapter.

2. Connect the other end of the Ethernet cable to your network hub, switch or

router.

The Link LED should light up green to indicate a proper physical connection between the

adapter and the network. If the Link LED doesn’t light up, please verify the cable

connections between all the network devices.